You are here: Construction » Lead Fixings » Lead Fixing Clips / Strips

Lead Fixing Clips / Strips

Lead fixing Clips will hold lead permanently in position. Cut to the required length fixing clips are recommended in rolls, welts, standing seams and for the clipping of lap joints and flashings.

Lead fixing clips should not be less than 50mm wide; they should be turned over at the edge of the lead by at least 25mm except where they are tucked into welted edges. Continuous clips should not be less than 75mm wide.

  • Available in copper and stainless steel.
  • Fixing strip available in 20m x 50mm wide.
  • Fixing clips available in packs of 25 – 600mmx 50mm.
  • Usage – Clips at 300 to 500mm centres depending on exposures for flashings.

 

Can't Find What You're Looking For?

If you can't find the information you need on our site, feel free to get in touch with us directly for more information.